Showing posts with label Physics. Show all posts
Showing posts with label Physics. Show all posts

Moment of inertia

Moment of inertia


According to Newton's first law, if any body is in a state of rest, then it remains in a state of rest and if it is. If it is moving in a straight line from the same trick, then it moves in the straight line from the same trick, unless it has to be replaced with some exterior forces and it should not change in the present state. These properties of the body that they oppose their state-change are called inertia (inertia).

Similarly, when a body rotates the back of an axis, then it has its tendency to resist its state-change. This quality of the body due to which it opposes the change in the rotation of an axis: the rotation of the body - the back of the axis: the inertia - the horizontal '. It's often To display. Rotation of any particle of the body - the surface of the axis: Inertia - the mass of the particle that is incomplete and its rotation - equals the product of the square of distance from the axis.


. Assuming M is a strong body of mass. Its vertical axis passing through its point of zero is to find the inertia - the horizontal. For this, the body is made up of several small particles. If the mass of these particles is M1, M2, M3,. . . . And rotate them - away from the axis R1, R2, R3, respectively. . . . . If so, the inertia of the particles - phonera na11, nepr:. . . . . Will be.

Therefore rotation of the whole body - the balance of the axis: the inertia - horizontal (i) the inertia of all particles - will be equal to the sum of the halves

           
                

Or
Here ! (Sigma) means - the sum of all the positions. Thus, the backbone of a given axis is equal to the sum of all the particles of the particles and the sum of the products of the distance groups corresponding to their axis
.
Inertia - In the SI method of acceleration, Molecular  and C. G. S Method is '. Its immense formula is [ML]

From the above, it is clear that any body of the body of an axis depends on the inertia -
 (i) on the mass of the body,
 (i) the position of the axis relative to the body, and
(iii) on the distribution of mass in the body mass relative to the axis


When the position of the rotating axis of the body is changed, the inertia of the body changes - the horizontal. Therefore, its rotation with the inertia of a body - it is necessary to clarify the position of the axis


Rotating - Radius of Gyration:

 If any mass is considered centered on one point, its rotation - the distance per axis so that the distance of the body is multiplied by the mass of the body, rotation of the object - after the axis: . Strength - When the torque is received, this distance is rotating - the body of the body relative to the axis is called 'rotation - radius'

If a body of the mass of the mass is rotated by a rotating axis then the inertia is i

  

Where the rotation radius relative to the rotation axis of k body is
 

Therefore, the rotation of a body is called the rotating radius relative to the rotation axis of the body, the square root of the motion of the inertia and the
mass of the mass of the rotating axis.

Ohm's law

Ohm's law


In 1826, the relationship between the German scientist, Dr. George Simon Om, and the flow of current and current flowing through the direction of a conductor was expressed by a rule called 'Om Law'.


ohm's law

According to this rule, if there is no change in the physical condition (like heat) of the driver, then the ratio of the probability imposed on its ends and the current flows is fixed.
So if there is a probable variant on the crossing of the bark and the stream flowing in it, then according to the Om rule.

   

According to the determinant definition, the ratio of 'V' / 'driver' to 'electrical resistance' is R

      
  

In this way, according to the rule of Oh, unless the conduct of a conductor changes in heat and other physical conditions, the driver's resistance remains fixed even though the extent of the impact on the ends of the driver
.


note

Ohm's law is only true for metal movements


Capacitor and Use of Capacitors

Capacitor


A capacitor is an adjustment in which the amounts of charge are stored on it without changing the size of the driver. Suppose that a driver is given 5 charges, then its valid capacity becomes V. Then the driver's capacitance
                 

              

  However, if we reduce the chance of the driver in any way, then more charges can be given to bring it back to the same extent, thus the capacitance of driver c will increase and increase.


capcitor and use of capcitor


16. Use of Capacitors

capacitor use in various purpose describe the given bellow


(1) To deposit the charge:

 The key function of the capacitor is to collect the charge. If there is a transient but strong current in a circuit, its best solution is to connect the ends of the circuit to the charging capacitor. Pulsed electromagnet, through which transient but intense magnetic fields are produced, receives electrons from the charged capacitors only.


 | (2) Energy depositing:

 Capacitors are not only for charging but also for energy. Enough energy is stored in the electric field installed between the plates of the charging capacitor. The device that accelerates the electrons is synchocyclodone, a large bank of capacitors in which the energy is stored and the machine keeps taking energy according to its requirement.


 (3) In electrical appliances:

Capacitors have a special place in many electrical appliances. When a stimulus circuit breaks suddenly, instead of breaking often, the spark is often produced. But if a capacitor is felt in the circuit, then the spark does not arise if the circuit induced by the breakdown of the circuit, charging the plateau of the capacitors. The capacitor is applied for the same work in the ignition system of the induction coil and the motor engine. Electric fan also has a valid motor capacitors


 (4) In electronic circuits:

 In almost all electronic circuits, capacitors are used. For example, in reducing the voltage in voltage in the power supply, in the transmission of pulsed signal and in the production and transmission of electromagnetic charge of radio frequency (i.e. transmission and transmission of radio and television programs) with capacitors an important role. _


 _ (5) In scientific study: 

The use of capacitor in scientific study is also less. By using different forms and shape plates in the capacitor, the electrical configuration of different configurations is established between them. In their respective areas, their behavior is studied by placing the absorbed substance.

Coulomb's law and Importance of the rule of Coolam:

Coulomb's law

  We have read that two similar types of fees back one another and the opposite type is mutually intruding. Attracted. This shows that a force works between two charges, which are called 'electric force'. the same . Between the allegations, the power force replication - this attraction between force and opposite charges - is the force. Even if electric charges are located in vacuum, they still have electrical power.
coulomb's law


. In 1785, French scientist Kulm gave a rule in relation to the force employed between two charges on the basis of experiments, which is called the 'rule of koolam'. According to this rule, there are two fixed points - the power of attraction or replication between charges, the sequential ratio of the product of the quantity of two orders and the sequential ratio of the curvature of the distance class between them. This force adheres to the line involved in those allegations.

Thus if the two point charge Q1 and Q2 are located at one distance of ' r ', then the force between them

                                                     

                                                     
Where K is a serum proportional element whose value depends on the medium between the charges and the amount of charge, distance and force if the force of the force 'Newton' is the number of distance meters and the amounts of charge and take place in the charge and are located in two charge (Nirvati) So the value of K is 9.0 x  by experiment
So the point between the points placed in the vacuum,

                                       

In this equation the Q1 = = Q2 = 1 coolom and absolute R = 1 meter then F = will be Newton.

Hence; 1 Coulom is a charge that replaces itself with the strength of utensils at the distance of 1 meter from its own equally in Nirvana (or air).

If the charge is located in the vacuum, then in the equation for the convenience, the sequential determinant K    is written

where
                     

 constant     Apesail Zero is called electrification of nirvat.

Comparison with the force of gravity of the electric force:


We can compare the power force working between two charging objects in which the gravitational force is working between them. These two army work according to the rules, and they are active in both of them. But there are some differences between these two too:

(i) Power Force attraction - force can also be done and replica - force also; While gravity - force always attracts force force. It shows that the charge can be of two types while the mass is only one type.


 (ii) Electrical force depends on the medium between two charges. Whereas gravitational force is not dependent on the medium between two people.


 (ii) The force of force from the gravitational force is very strong. For example, between two protons, the electric force is 10 times larger than the force of gravity between them. Between two electrons it is 10 times larger than that.

Importance of the rule of Coolam:

 The law of coolam is true from very great distances to very little distance from atomic distance (= meters) and atomic distance (= meters). Therefore, this rule is not only knowledge of forces operating between powers, but also helps to explain those forces that cause the atom's electrons to bind to their nuclei to make two or two atoms, and with more atomic molecules Talk, and many atoms or molecules interact with each other and make concrete and preto. Most of the forces that experience in our daily life, which are not gravitational force, are electric power. | Another, very intense attraction - acts between the particles present in the nucleus of the atom (protons and neutrons), which acts as a force that connects these squads with each other. This is called 'nuclear force'. This force does not depend on the charge or discharge of the particles, nor does it have any relation with the rule of Kulam. But this does not mean that the thermal power replication does not exist between protons (within the nucleus). Power replication force is present (though it is atomic attraction - very small in front of force) and plays an important role within the nucleus. If this force is not there then the heavy nucleus is not radioactive and heavy elements (which are temporary) before uranium are permanent.

Reflection of light and snail law

A ray of light runs through a straight line, but when the ray of light 

goes through a transparent medium to another transparent medium,

 then it gets distracted by its path. In the second medium, the beam,

 either towards the first medium, either bends towards the

 perpendicular or away from the perpendicular

If the light beam goes from one medium to another, it is called 

"refraction" from its path, if the refracted ray bends toward 

the relation relative to the incident ray, then the second is called 

the dense relative to the medium, but if the refracted ray is an 

incident ray Removed from the relative angle, then the other 

medium is called the relative viral of the first

Light refraction has two rules
Reflection  of light and snail law
1 Incident ray, refracted ray and perpendicular to the point of

 view are all in the same plane

2 For any two of the medium and for the light of certain colors

 (wavelength), the ratio of sin to the angle of incidence and the 

angle of refraction remains constant.

If the angle of incidence is i and the angle of refraction then


                                                     

This rule is called the snail rule. This determinant is called the 

refractive index of the second medium relative to the first medium

, if we first display the medium 1 and the second medium 2, the

 refractive index is displayed from 1N2.

Analytic method of vector addition

If two vectors display the results from two adjoining side drawn from any point of a parallelogram in the direction of the result, then the result and direction, the parallelogram that is drawn by the diagonal has been drawn from the same point to add the vector Parallel quadratic rules
www.solvertrick.comAssuming vector and are bent at opposite angle, they are displayed in the direction of the parallel quadrilateral OPQS in the direction of OPQS and OP and the OS, then according to the rule of parallelogram, resultant of And will be represented by the diagonal OQ in the result and direction. In order to find the result of the resulting , we increase the side OP and pull the vertical QE from the point Q, thus
Like this QPE =  
Thus, in the right angled triangle OEQ




NOW



SO




IN Right-angled triangle

 
OR



So the final equation will be

   ,  NOW

OP =A , PQ= OS = B , OQ = R ,,    SO





To find out the direction of the resulting , say that the angle of vector is formed by

   NOW  , OP = A , PE = BCOS

To find the value of QE, in triangle PEQ

 
QE = PQsin = Bsin  ,so




Special cases

(1) when both the vector are in same direction

then  = 0
In this  
Again  equation 

   and


Thus the result of result is equal to yoga of both vector and and in and same direction

(2) when the both vector are at right angle to each other 

then  ,   in this    




(3) When both the vectors are in opposite direction

then  
Again  equation 





Thus the result of the resultant vector is equal to the difference of the result of both vectors and in the direction of the large vector
It is clear from the above that the result of the result of both vector is maximized, then both vectors are in the same direction and this is minimal when they are in the direction